User Tools

Site Tools


exacqvision

ExacqVision Install and setup


  1. INSTALL
    1. Open Lowell Staff Applications folder applicationlauncher.jpg
    2. Locate and double click the INSTALL ExacqVision icon exacqvision1.jpg
    3. Follow the prompts…. Click Next.
    4. Accept the EULA…. Click Next.
    5. Click Next.
    6. CHECK THE BOX “PUT A SHORTCUT ON THE DESKTOP”Click Next.
    7. UNCHECK THE BOX “Run ExacqVision Client”Click Finish
    8. Launch Exacqvison from the desktop icon.
    9. Quit the program (If you dont closeout, it will not save the info in the next steps and you will have to re-enter that info)
  2. SETUP
    1. Launch Exacqvison from the desktop icon a second time.
    2. In the “Find Systems” tab, Check the box for IP address range and CHANGE the IP to the following IP; 10.8.9.50 -to-.51 (see picture below) evip.jpg
    3. Click “Find”
    4. Once found, ONLY Check the two new servers (see picture below) evip2.jpg
    5. Scroll all the way down and click the button “Add Selected” (see picture below) exacqvision25.jpg
    6. When prompted: Log on (USERNAME IS ALL LOWERCASE and the Password is case sensitive) THEN check both boxes. exaqvision_20.jpg

That is it. Just click on the Live Views to see your cameras.

TRAINING VIDEOS HERE:


exacqvision.txt · Last modified: 2021/07/26 12:53 by jasonw